DOWNLOAD MD3000I SMCLI

As soon as you run this command, the existing storage array becomes unresponsive. Specifies the cache block size used by the RAID controller module for managing the cache. The discrete lines test enables each RAID controller module to verify that control signal transitions can be observed at the control inputs of the alternate RAID controller module. This command shows a string of text from a script file. The default value is 1.

Uploader:	Dolar
Date Added:	7 August 2015
File Size:	60.38 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	34769
Price:	Free* [*Free Regsitration Required]

Where do I find the Dell PowerVault Modular Disk Storage Manager for use with my MDi SAN?

For other resource CDs, refer to http: Name of the file to which to save the storage array support-related data.

Specifies the new name to give an existing virtual disk. md3000j

You can re-create a single snapshot virtual disk or re-create multiple virtual disks. Enclose smcil disk group number in square brackets [ ].

You must include a comma after the firmware file name. Up Down Hi Sascha, please try to run the following command on the machine the parent probe of the sensor is running on:.

To use the free capacity following virtual disk 2, specify:.

Script Commands: Dell PowerVault Modular Disk Storage Manager CLI Guide

The preferred owner of a virtual disk is the RAID controller module that currently owns the disk group. Returns information about all virtual disks in the storage array. Saves the global settings to the file. Displays a list of the drive channel port locations and the drive channel connections. The setting to enforce enclosure loss protection when you create the disk group.

This command activates firmware previously downloaded to the pending configuration area in the RAID controller modules in the storage array. The defaultGroup is the host group that contains the host to which the virtual disk is mapped.

This chapter is organized in four sections:. Removes the access virtual disk.

Number of disk groups in the storage array. You can also create a mc3000i host group and assign the host to the new host group with this command.

The default value is failSnapShot. Before entering the autoConfigure storageArray command, enter the show storageArray autoConfiguration command.

Subscribe to RSS

You might need to increase the size of your display buffer to see all the information. If the value that you entered is not valid, the RAID controller module returns a list of valid values. The setting to spin the physical disks back down after the disk group dependencies have been read. This command returns information about the candidate virtual disks that you can use as the source for a virtual disk copy operation.

Name of the specific virtual disk for which you are retrieving performance statistics. Email Required, but never shown. Last change on May 6, If the client information matches the listener information, then the listener grants a sjcli to the database server.

storage - How do I expand a PowerVault MDi virtual disk? - Server Fault

The enclosurePositions sequence 1 84 12 places the RAID enclosure in the second position, expansion enclosure 1 in the first position, and expansion enclosure 12 in the third position. This parameter enables the user to specify a name for a new volume group that is automatically created by the RAID controller module.

Enclose the new name of the HBA host port in double quotation marks " ". Name of the specific virtual disk for which to repair nd3000i. Selects all hosts identified by show storageArray pendingTopology.

Created on Jul 11, 3: